Hello guest
Your basket is empty
The Festool And Mafell Centre Dublin. 
Please Allow 1 to 5 Days for Delivery If In Stock.We Will Notify You if The Item Has To Come From Germany 
You are in: All categories > MFT
Code: 500366

Perforated top LP-KA65 MFT/3 - 500366

€186.47 exc. VAT €229.36 inc. VAT

Order On Request Only.7-10 Days Delivery.

Perforated top LP-KA65 MFT/3
for KA 65

Cut-outs to perfection.
Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.

Perfectly prepared cut-out for the AP-KA 65 adapter plate
Sliding strip can be used flexibly due to M4 threaded sockets
Especially steady thanks to the use of a three-layer MDF panel
Can be easily replaced by the standard perforated board when MFT is present
allows the user to swivel the machine (0 – 47°) in the bench in combination with the AP-KA 65 adapter plate and therefore position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects
Usages
Main applications
With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65
For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°
Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings
Technical Data

Dimensions length x width 1 102 x 718 mm

Quantity:

Description

Cut-outs to perfection.
Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.

Perfectly prepared cut-out for the AP-KA 65 adapter plate
Sliding strip can be used flexibly due to M4 threaded sockets
Especially steady thanks to the use of a three-layer MDF panel
Can be easily replaced by the standard perforated board when MFT is present
allows the user to swivel the machine (0 – 47°) in the bench in combination with the AP-KA 65 adapter plate and therefore position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects
Usages
Main applications
With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65
For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°
Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings
Technical Data

Dimensions length x width 1 102 x 718 mm

Also in MFT